ON-SITE VEHICLES & MARINE SERVICE
Shrink Wrapping for Vessels, Specialty Vehicles & Transport Equipment
We come to your marina, yard, dockside, or production facility and wrap vessels and specialty vehicles into drum-tight covers — for Canadian winter storage, long-haul transport, or pre-delivery shipping. Same-week scheduling across Eastern Ontario and the GTA.
Have an urgent request? Call us directly: +1 (343) 314-3420
17+ Years Experience
Pro-Grade Equipment
Safe. Fast. Reliable
Insured & Compliant
100% Guaranteed
Get Your Free Quote
Protect equipment, cargo, and freight on-site.
17+ Years Experience
Pro-Grade Equipment
Safe. Fast. Reliable
Insured & Compliant
100% Guaranteed
WHY SHRINK WRAP
Uncovered through an Ontario winter costs more than the cover.
UV chalks gelcoat and paint. Freeze-thaw drives moisture into seams until something cracks. Snow loads sag tarps until they tear and dump water inside. Mice get in through any opening and chew through wiring, fuel lines, and upholstery.
Heat-shrunk film fits drum-tight to the hull or equipment — no slack, no flap, no pooling. Support frame underneath gives the cover pitch so snow and water slide off. Vents release internal moisture. One wrap holds the full off-season and comes off clean in spring.
BOATS & MARINE WINTERIZATION
Drum-tight cover, built on-site
September through December across Eastern Ontario marinas, private docks, and storage compounds. Cruisers, runabouts, pontoons, sailboats with masts stepped or unstepped, personal watercraft. Custom support frame, vented at the high points, sealed to the waterline, hull tape that leaves no residue on gelcoat in spring. Marina partnerships available for high-volume seasonal programs.
Custom-fit cover with support frame for snow load
Vented to prevent condensation, mould, and mildew
White film blocks UV and reduces interior heat
Zipper-door access for mid-winter inspection
OUTDOOR STORAGE
Equipment that sits in the yard, fully sealed
Capital equipment often arrives months before installation is ready — HVAC units, conveyor sections, modular trailers, complete production lines. Sitting outdoors, exposed steel rusts, fan belts get chewed by mice, and the project budget pays for it later. We wrap each unit with vented, UV-stable film designed to hold up through Canadian winters and full seasons of weather.
Vented to prevent condensation and internal corrosion
UV-stabilized film for long-term outdoor exposure
Sealed against pests, dust, and water ingress
Removed cleanly when the equipment is ready for install
NEW-BUILD VESSEL SHIPPING
Wrapped before delivery — receiving requirements met
Builders shipping new vessels to customers, military buyers, or government receivers face the same rule on every delivery: the receiver won't accept the boat unwrapped. We wrap finished hulls inside the build facility — patrol boats, work boats, fire/rescue craft, custom builds — sealed to the contour and ready for flatbed or open-trailer transit.
Wrapped inside the build facility before the vessel goes on the trailer
Meets military and government receiving-dock requirements
Drum-tight cover holds through long-haul transit
Coordinates with builder production schedule — no ship-date delay
SPECIALTY VEHICLES & TRANSIT EQUIPMENT
Rail cars, buses, helicopters, aircraft components
Outside the marine season, the same techniques apply to specialty vehicles and transit equipment in build, modification, storage, or transport. Rail cars between modification cycles, transit buses staged for overhaul, helicopter airframes and aircraft nose-cone components, oversized vehicle components on flatbed moves.
Rail cars and transit vehicles wrapped between modification cycles
Aircraft and helicopter components covered for storage or air-freight
Heavy-grade film rated for long outdoor storage windows
Vendor onboarding documentation for defence and transit clients
WHY HEAT-SHRUNK VS. TARP
Drum-Tight Means Zero Flap. Zero Chafing. Zero Re-Wraps.
A tarp is rated for the moment it's installed. Heat-shrunk film is rated for the entire length of exposure — the way the cover behaves on day 1 is the way it behaves on day 90. Higher up-front, lower total cost.
INSURED & COMPLIANT
We meet your vendor onboarding requirements
Every site we work on receives the documentation it needs. If your facility has a vendor portal, we complete it.
$5M General Liability Insurance
Full WSIB Coverage (Ontario)
Hot Work Permit Compliant
WHMIS Trained & Certified
Full WSIB Coverage (Ontario)
TRUSTED ACROSS ONTARIO INDUSTRY
Industries we serve
Manufacturing Plants
Automotive Suppliers
Rail & Transit
Government & Defence
Marine Builders
Industrial Contractors
Freight & Logistics
TRUSTED ACROSS ONTARIO INDUSTRY
Industries we serve
Manufacturing Plants
Automotive Suppliers
Rail & Transit
Government & Defence
Marine Builders
Industrial Contractors
Freight & Logistics
HOW IT WORKS
How a job runs
From first call to final walk-through.
01
This is a Paragraph Font
Send dimensions or pictures. We respond same-day with a written estimate.
02
Schedule
We confirm the date, send certificates if needed, and arrive with all gear.
03
On-site wrap
Most industrial wraps complete in a few hours. Larger jobs run 1–2 days.
04
Hand-off
Equipment is sealed, photographed, and ready for transport or storage. Final walk-through provided.
STILL NOT SURE?
Frequently Asked Questions
Question 1: What can you shrink wrap?
We shrink wrap industrial machinery, equipment, freight/cargo, tooling, construction materials, and specialty items. If it needs protection for shipping or outdoor storage, we can typically wrap it.
Question 2: Do you offer on-site (mobile) shrink wrapping?
Yes. We come to your facility, yard, jobsite, or storage location with the tools and materials needed. This saves time and eliminates the need to transport equipment to a shop.
Question 3: Can shrink wrap protect equipment during shipping and transport?
Yes. Industrial shrink wrap creates a tight, weather-resistant barrier that helps protect against rain, snow, road debris, dust, and contamination during transit. It’s commonly used for flatbed loads and oversized shipments.
Question 4: How long does a typical job take?
Most projects can be completed the same day once scheduled, depending on size and complexity. We’ll confirm timing after we review the item dimensions, access, and site conditions.
Question 5: Is shrink wrap suitable for long-term outdoor storage?
Yes. Properly installed shrink wrap helps keep assets clean and dry for extended storage. Venting and correct installation techniques reduce moisture issues and help prevent damage over time.
Question 6: What information do you need to quote a project?
Item type, approximate dimensions, location (city/site), timeline, and whether it’s for shipping or storage. Photos help a lot, especially for oversized equipment or irregular shapes.
Question 7: Are you insured and compliant for industrial jobsites?
Yes. We carry liability insurance and meet common jobsite safety requirements (WSIB compliance, WHMIS, Working at Heights, and hot-work/site rules where required), so vendors can be approved faster.
Ready to Wrap It?
Tell us what you need protected — we’ll respond with a fast, no-obligation quote.
© Copyright 2026. Kingston, Canada. All rights reserved.