ON-SITE FREIGHT & CARGO SERVICE
Freight & Cargo Shrink Wrapping
We come to your shipping yard, plant, or trucking terminal and wrap freight before it goes on the road — flatbed loads, oversized cargo, and oversize-permit moves sealed drum-tight against weather, road debris, and receiving-dock rejection. Same-week scheduling across Ottawa, Kingston, and the GTA.
Have an urgent request? Call us directly: +1 (343) 314-3420
17+ Years Experience
Pro-Grade Equipment
Safe. Fast. Reliable
Insured & Compliant
100% Guaranteed
Get Your Free Quote
Protect equipment, cargo, and freight on-site.
17+ Years Experience
Pro-Grade Equipment
Safe. Fast. Reliable
Insured & Compliant
100% Guaranteed
WHY SHRINK WRAP
Tarps flap. Straps cut in. Loads arrive rejected.
A tarp on a flatbed flaps loose at highway speed, pools water in the folds, and chafes the product underneath. By the time the load reaches the receiving dock, the cover is torn, the freight is marked up, and the receiver writes it up before signing the BOL. That becomes a chargeback or a return at your cost.
Heat-shrunk industrial film fits drum-tight and stays sealed for the full transit. No flap, no pooling, no chafing. Padding under the chain tie-downs prevents film piercing at the binder points. The load arrives the way it left the yard.
FLATBED & OPEN-TRAILER TRANSIT
Wrap freight to survive the highway, not just the yard
Open-trailer transit means sustained highway wind, road spray, salt, and gravel kick-up. We wrap on-site at your shipping yard, plant, or trucking terminal — padding under chain contact points, heat-sealed seams, vents where moisture release matters.
Drum-tight seal that holds at highway speed
Padding under chain tie-downs prevents film piercing
Heat-sealed seams hold through rain, snow, and road salt
Same-week scheduling across Eastern Ontario
OUTDOOR STORAGE
Equipment that sits in the yard, fully sealed
Capital equipment often arrives months before installation is ready — HVAC units, conveyor sections, modular trailers, complete production lines. Sitting outdoors, exposed steel rusts, fan belts get chewed by mice, and the project budget pays for it later. We wrap each unit with vented, UV-stable film designed to hold up through Canadian winters and full seasons of weather.
Vented to prevent condensation and internal corrosion
UV-stabilized film for long-term outdoor exposure
Sealed against pests, dust, and water ingress
Removed cleanly when the equipment is ready for install
OVERSIZED & OUT-OF-GAUGE LOADS
Custom-fit cover for loads no standard tarp will handle
Modular trailers, conveyor sections, fabricated assemblies, crated equipment past standard pallet width. Standard tarps tent over the high points and leave the rest exposed. We wrap to the actual contours on-site, sealing every face down to the skid.
Form-fits irregular shapes and oversize-permit loads
No tenting, no exposed corners, no slack catching wind
Sealed to the skid for full-perimeter protection
Single-piece or multi-section seal for loads over 40 feet
RECEIVING-DOCK COMPLIANCE
Meets the receipt requirements that get loads accepted
Military bases, OEM plants, government facilities, port and rail terminals require freight to arrive wrapped, sealed, and intact. If the cover fails dock inspection, the load goes back. We wrap to receiving-grade standard with documented coverage.
Meets OEM, military, and government delivery requirements
Sealed and photographed before dispatch
Clean cover that passes dock-side inspection
Vendor onboarding documentation when required
WHY HEAT-SHRUNK VS. TARP
Drum-Tight Means Zero Flap. Zero Chafing. Zero Re-Wraps.
A tarp is rated for the moment it's installed. Heat-shrunk film is rated for the entire length of exposure — the way the cover behaves on day 1 is the way it behaves on day 90. Higher up-front, lower total cost.
INSURED & COMPLIANT
We meet your vendor onboarding requirements
Every site we work on receives the documentation it needs. If your facility has a vendor portal, we complete it.
$5M General Liability Insurance
Full WSIB Coverage (Ontario)
Hot Work Permit Compliant
WHMIS Trained & Certified
Full WSIB Coverage (Ontario)
TRUSTED ACROSS ONTARIO INDUSTRY
Industries we serve
Manufacturing Plants
Automotive Suppliers
Rail & Transit
Government & Defence
Marine Builders
Industrial Contractors
Freight & Logistics
TRUSTED ACROSS ONTARIO INDUSTRY
Industries we serve
Manufacturing Plants
Automotive Suppliers
Rail & Transit
Government & Defence
Marine Builders
Industrial Contractors
Freight & Logistics
HOW IT WORKS
How a job runs
From first call to final walk-through.
01
This is a Paragraph Font
Send dimensions or pictures. We respond same-day with a written estimate.
02
Schedule
We confirm the date, send certificates if needed, and arrive with all gear.
03
On-site wrap
Most industrial wraps complete in a few hours. Larger jobs run 1–2 days.
04
Hand-off
Equipment is sealed, photographed, and ready for transport or storage. Final walk-through provided.
STILL NOT SURE?
Frequently Asked Questions
Question 1: What can you shrink wrap?
We shrink wrap industrial machinery, equipment, freight/cargo, tooling, construction materials, and specialty items. If it needs protection for shipping or outdoor storage, we can typically wrap it.
Question 2: Do you offer on-site (mobile) shrink wrapping?
Yes. We come to your facility, yard, jobsite, or storage location with the tools and materials needed. This saves time and eliminates the need to transport equipment to a shop.
Question 3: Can shrink wrap protect equipment during shipping and transport?
Yes. Industrial shrink wrap creates a tight, weather-resistant barrier that helps protect against rain, snow, road debris, dust, and contamination during transit. It’s commonly used for flatbed loads and oversized shipments.
Question 4: How long does a typical job take?
Most projects can be completed the same day once scheduled, depending on size and complexity. We’ll confirm timing after we review the item dimensions, access, and site conditions.
Question 5: Is shrink wrap suitable for long-term outdoor storage?
Yes. Properly installed shrink wrap helps keep assets clean and dry for extended storage. Venting and correct installation techniques reduce moisture issues and help prevent damage over time.
Question 6: What information do you need to quote a project?
Item type, approximate dimensions, location (city/site), timeline, and whether it’s for shipping or storage. Photos help a lot, especially for oversized equipment or irregular shapes.
Question 7: Are you insured and compliant for industrial jobsites?
Yes. We carry liability insurance and meet common jobsite safety requirements (WSIB compliance, WHMIS, Working at Heights, and hot-work/site rules where required), so vendors can be approved faster.
Ready to Wrap It?
Tell us what you need protected — we’ll respond with a fast, no-obligation quote.
© Copyright 2026. Kingston, Canada. All rights reserved.